- Filter cloth
- Filter cloth
- filter bag
- Industrial filter cloth
- Polypropylene filter cloth
- Polyester filter cloth
- Monofilament filter cloth
- Dust bag
- Coal washing, tailings, mixing station, special filter cloth for sludge
- Filter cloth for sewage treatment
- Cotton / Antistatic Filter Cloth
- Vinylon filter cloth
- Filter cloth for filter press
- Centrifuge bag
Filter cloth needs to choose the right dust bag suitable for the corresponding dust temperature
What is the measurement process of filter cloth ?
1. Let the belt filter press operate normally and adjust the motor speed to a low speed.
2. Prepare materials and tools for measuring filter cloth, soft braided rope and tape measure.
3. When the metal joint appears on the filter belt of the filter press, connect the braided rope to the metal joint of the filter cloth for a sufficient time. Let the braided rope rotate with the operation of the filter cloth.
4. When the braided rope rotates with the filter belt once, that is, when the metal joint appears, the braided rope is marked. This is to measure the length of the braided rope around the filter cloth, that is, the length of the filter cloth.
5. Measure the length of another filter belt in the same way.
In the process of using the filter cloth, the wind speed of the filter is very high, which will directly cause the main cause of bag damage. In the process of dust removal, some units blindly save equipment costs and increase profits. The design wind speed increases during the design process.
Inferior filter cloth does not respond to the user's use in a relatively short time, but this will shorten the service life of the filter bag, thus giving customers no money, but the economic burden is relatively large. waste time.
The dust filter cloth needs to choose the dust bag suitable for the corresponding dust temperature. If the temperature is too high during use, the media will cause the selected filter bag to exceed the normal working temperature, thereby shortening the product life. In severe cases, there will be burns.
In the process of selecting the filter cloth, the inlet temperature of the dust collector needs to be measured and calculated. Please choose a suitable dust bag when using. The processing of bags is very important. In recent years, some small manufacturers have used their sewing machines for processing and use. The quality of the raw materials is relatively poor.